Filter
Top Products
Security
802.1X
Cisco Small Business SG200 Series 8-port Smart Switch 163
10
• User Name—Select the user to be used by the port to identify itself as a
supplicant. The user must be one of the switch management users
configured in the switch. The password configured for the user will be used
in the authentication process. As a supplicant, the switch supports EAP-MD5
authentication method. (See Managing User Accounts to set up the users.)
STEP 4 Click Apply and then click Close. Your changes are saved to the Running
Configuration.
Displaying Authenticated Hosts
To display ports that have authenticated users on the Authenticated Hosts page,
click Security > 802.1X > Authenticated Hosts in the navigation window.
The Authenticated Hosts Table displays the following information for each host:
• Port—Port used for authentication.
• User Name—User name of the host.
• Supplicant MAC Address—Supplicant device MAC address.
• Session Time—Time since the supplicant logged in.
• Session Timeout—Time that the given session is valid. The time period in
seconds is returned by the RADIUS server on authentication of the port.
• Authentication Method:
- Local—A user ID and password combination from the supplicant was
compared with a locally-stored user database on the switch. Or the
switch could not reach a server and the local user database was used to
accept or reject the request.
- None—No authentication method was used. Or the switch attempted to
could not reach the server, and no authentication method was used and
the request was accepted.
- RADIUS—Authentication requests are passed to a RADIUS server that
replies with RADIUS Access-Accept or Access-Reject frames. If the
switch cannot reach the server, the request is denied.