Filter
Top Products
Administration
LLDP-MED
Cisco Small Business SG200 Series 8-port Smart Switch 88
3
Inventory
• Hardware Revision—Switch hardware revision ID.
• Firmware Revision—Switch firmware revision number.
• Software Revision—Switch software revision number.
• Manufacturer Name—Switch manufacturer name.
• Model Name—Switch model name.
• Asset ID—LLDP-MED asset ID for the switch.
Location
• Subtype—Select one of the following options to configure how the switch
location is identified in TLVs:
- Coordinate Based—Switch location is identified by using GPS
coordinates in hexadecimal format.
- Civic Address—Switch location is identified by using a geographic
description of the location, such as city, street name, and building name.
- ELIN—Switch location is identified by using the Emergency Location
Identification Number of the switch.
• Location Information—Switch location information, in the format specified
by the Subtype field.
Extended PoE
• PoE Device Type—If PoE functionality is advertised, this field indicates
whether the device is a Powered Device (PD) or Power Sourcing Equipment
(PSE).
Extended PoE PD
If the device is powered by PoE, the following properties can be advertised:
• PoE Power Value—Power in watts requested by the device.
• PoE Power Source—Indicates how the powered device receives power:
- Primary—A power supply is connected directly to the device.
- Backup—The device receives power from a PoE power sourcing
equipment.