Filter
Top Products
178
Waypoint Information screens with the Go Waypoint command
selected (left) and the Find on Map command selected (right).
To clear these menus and return to the previous page, press EXIT
repeatedly.
5. If you're looking by name, there are two options: A. You can spell out
the name in the top selection box. Press
↑ or ↓ to change the first letter,
then press → to move the cursor to the next letter and repeat until the
name is correct
, then press ENT|ENT. B. Or you can jump down to the
lower selection list by pressing
ENT, then use ↓ or ↑ to select a waypoint
from the list and press
ENT. The waypoint information screen appears.
Find By Name menu (left). Waypoint Information screen (center). The
found waypoint is highlighted by the cursor on the Map Page (right).
A. To navigate to the waypoint, press ENT. (Go Waypoint command is
already highlighted.) The unit will show navigation information to
the waypoint
.
B. To find the waypoint, press ↓ to FIND|ENT. The Map Page appears
with the cursor highlighting the found waypoint.
To clear these menus and return to the previous page, press
EXIT
repeatedly.