Filter
Top Products
40
2. PAGES – Pressing this and the ← → arrow keys switches the unit
between the four different page screens. (Satellite Status Page,
Navigation Page, Map Page and Sonar Page.) Each page represents one
of the unit's major operation modes.
3. MENU – Press this key to show the menus and submenus, which
allow you to select a command or adjust a feature. This also accesses
search functions for streets, intersections, addresses and highway exits.
4. ARROW KEYS – These keys are used to navigate through the
menus, make menu selections, enter data and move the map and sonar
chart cursors.
5. ENT/ICONS (Enter & Icons) – This key allows you to save data,
accept values or execute menu commands. It is also used to create
event marker icons.
6. EXIT – The Exit key lets you return to the previous screen, clear
data and close menus.
7. WPT – (Waypoint) The Waypoint key is not only used to save, recall
and search for waypoints, but also provides access to the waypoint list.
It launches the Point-of-Interest (POI) search menus and is involved in
some navigation functions.
8. ZOUT – (Zoom Out) – This key lets you zoom out the sonar display.
On the Sonar Page, it returns you to a full sonar chart display, showing
the entire water column from surface to bottom. On the Map Page, the
ZOUT key allows you to see a larger geographic area. Less detail is seen
as you zoom out.
9. ZIN – (Zoom In) – This key lets you zoom in on the sonar display. On
the Sonar Page, it enlarges fish signals and bottom detail. On the Map
Page, zooming in lets you see greater detail in a smaller geographic
area.
Power/lights on and off
To turn on the unit, press PWR. As the unit powers up, the Map Page is
displayed first. To switch to the Sonar Page, press
PAGES|→|EXIT.
To turn on the backlight, press PWR again. The unit has three backlight
levels. Repeatedly pressing
PWR will cycle through the backlight
settings.
Turn off the unit by depressing the
PWR key for 3 seconds.