Filter
Top Products
78
Split Frequency Sonar Chart page, with
50 kHz view on the left and 200 kHz view on the right.
You can adjust the sensitivity in each window.
To adjust sensitivity in auto mode:
1. Press
MENU|ENT.
2. The unit asks which window (50 kHz or 200 kHz) you want to adjust.
Press ← or → to select the one you want, then press
ENT.
3. The Sensitivity Control Bar appears. Press ↓ to decrease sensitivity;
press ↑ to increase sensitivity. When it's set at the desired level, press
EXIT. (When you reach the maximum or minimum limit, a tone sounds.)
The Split Frequency Sonar Chart page allows you to adjust
sensitivity separately for each window.
Digital Data Display
This mode displays five digital data boxes on the left side of the screen. In
the example below, Depth, Water Speed, Water Distance, Water Temp and
Local Time are shown.