Filter
Top Products
138
ENT|EXIT to get back to the main page display where the data option
you selected is displayed in the selected digital data box. You can select
another data box to modify or press
EXIT to return to normal operation.
A Page digital data boxes can show a limited number of boxes. You can
not turn them off or add more data boxes.
GPS Simulator
The GPS simulator lets you use the unit as if you were outdoors navi-
gating somewhere. It's a great way to practice using your unit. You can
set the starting location by entering latitude/longitude (Starting Posi-
tion) or from a stored waypoint, map place or POI location (
CHOOSE START
command). You can steer your position and change speed on the map by
using the arrow keys (
STEER WITH ARROWS command) or by setting the track
and speed in the dialog boxes provided on the simulator menu screen.
To get to the GPS Simulator:
1. Press
MENU|MENU|↓ to GPS SETUP|ENT.
2. Press ↓ to
GPS SIMULATOR|ENT. The GPS Simulator Menu appears.
GPS Setup Menu (left). GPS Simulator menu (center).
Map Page showing Track and Speed steering arrow indicators (right).
Make the desired settings, then turn on the simulator by highlighting
the
GPS SIMULATOR ON box and pressing ENT key. Press EXIT repeatedly
to get back to the main page display. A message and tone appear peri-
odically, warning you that the simulator is on. To turn the simulator
off, repeat the above steps or turn off the unit.
While in simulator mode, you can press
EXIT to clear the steering and
speed boxes from the screen while continuing the simulation. This will
allow you to use the map cursor during a simulation. To turn steering
and speed boxes back on again, return to the GPS Simulator menu, se-
lect the
STEER WITH ARROWS command and press ENT. Press EXIT repeat-
edly to return to the main page display.