Filter
Top Products
165
NOTE:
Since the Go To waypoint command is highlighted, you can navi-
gate to the selected POI by pressing
ENT|EXIT.
Find Interstate Highway Exits
1. From the Map Page, press MENU|↓ to HIGHWAY EXITS|ENT, which calls
up the Find Exit menu.
Find Highway Exits command (left) and Find Exit menu (right).
2. First, select a highway name by pressing ENT, which calls up the
Find By Name menu. There are two highway search options: A. You
can spell out the highway name in the top selection box. Press ↑ ↓ to
change the first letter, then press → to move the cursor to the next let-
ter and repeat until the name is correct, then press
ENT|ENT. B. Jump
down to the lower selection list by pressing
ENT, then press ↓ ↑ to select
a highway from the list, then press
ENT.
Find By Name menu (left). Find Exit menu with exit selected (right).