Filter
Top Products
77
Main Menu with Sonar Setup selected (left). Sonar Simulator selected
(center). Sonar Simulator menu with simulator turned off (right).
NOTE:
With Simulate Position checked, the simulator will automatically run
the GPS simulator if GPS data was recorded with the sonar log.
2. To use the default sonar chart log stored in the unit, press
ENT|EXIT.
The recorded chart begins scrolling across the screen.
Sonar Page playing a recorded sonar chart in Sonar Simulator mode.
Tip:
The Sonar Simulator can use sonar charts that you or a friend has
recorded on an MMC card. To play back your own sonar chart,
make sure the MMC containing the chart is installed, then:
1. Press
MENU|MENU|↓ to SONAR SETUP|ENT|↓ to SONAR SIMULATOR|ENT.
2. Press ↓ to
CHART USED|ENT.
3. Press ↓ ↑ to select chart name|
ENT|↑ to SONAR SIMULATOR
ON|ENT|EXIT.
Play symbol
flashing
Title bar with
chart file name