Filter
Top Products
53
3. Press ↑ ↓ to change the first number, then press → to move the cur-
sor to the next number and repeat until the depth is correct, then press
ENT.
4. Press ← to
SHALLOW ALARM ENABLED|ENT.
To adjust and turn on the deep alarm:
1. From the Sonar Alarms menu, press ↓ to DEEP ALARM ENABLED|→ to
DEEP ALARM DEPTH|ENT.
2. Press ↑ ↓ to change the first number, then press → to move the cur-
sor to the next number and repeat until the depth is correct, then press
ENT.
4. Press ← to
DEEP ALARM ENABLED|ENT.
Zone Alarm
The zone alarm is triggered when any echo passes inside the zone
alarm bar, shown on the right side of the screen.
To adjust and turn on the zone alarm:
1. From the Sonar Alarms menu, press ↓ to ZONE ALARM ENABLED|→ to
ADJUST ZONE|ENT.
Sonar Alarms menu with Adjust Zone selected (left).
Adjust Zone Alarm selection box with Upper selected (right).
3. To set the upper boundary for the Zone Alarm, use ← → to select
UPPER, then press ↑ ↓ to move the top of the bar to the desired depth.
4. To set the lower boundary for the Zone Alarm, use ← → to select
LOWER,
then press ↑ ↓ to move the bottom of the bar to the desired depth.
5. Press
EXIT|← to ZONE ALARM ENABLED|ENT. Now, any echo — fish, bot-
tom, structure — within the zone alarm's depth range will trigger the
zone alarm.