Filter
Top Products
69
When you boost ping speed and switch into HyperScroll, the width of
the FasTrack bar graph display doubles in width at the right side of the
screen. This allows you to better see the virtually instantaneous sonar
returns, just as you would on a flasher sonar unit. For more informa-
tion on FasTrack, see its entry in this section.
Reset Options
This command is used to reset all features, options and settings to fac-
tory defaults. It is useful when several settings have been changed and
you want to return the unit to basic automatic operation.
1. Press
MENU|MENU|↓ to SYSTEM SETUP|ENT|↓ to RESET OPTIONS|ENT.
2. Press ← to
YES|ENT.
3. All menus are cleared and the unit reverts to the Map Page at the
4000-mile zoom. All options have been set to factory default settings.
System Setup menu with Reset Options selected (left).
Reset Options dialog box (right) with Yes selected.
NOTE:
Reset Options does not erase any waypoints, routes, plot trails, or
sonar logs.
Reset Water Distance
Sonar chart's digital data display option includes a box that shows Wa-
ter Distance. This information is calculated from an optional water
speed sensor, not the GPS. The Water Distance window can be reset to
zero using the Reset Water Distance command.
Press
MENU|MENU|↓ to SONAR SETUP|ENT|↓ to RESET WATER DIS-
TANCE
|ENT. The menus are cleared and the water distance is reset to 0.00.