Filter
Top Products
1. MOUNTING
1-15
1.2 Transceiver Unit
• The transceiver unit generates heat so the mounting location should be well ventilated and
dry.
• The unit is only designed for bulkhead mounting. The unit weighs 40 kg so reinforce the
mounting location if necessary.
• The length of the cable between the hull unit and the transceiver unit is 5 or 10 m, and the
length of the transducer cable is about 6 m. Determine mounting location considering these
cable lengths.
• Secure the maintenance space shown in the figure below for ease of maintenance and
service.
Fasten the transceiver unit to the mounting location with M10 bolts and nuts.
165 165
736
689
13
40
165165
425
12
200
200
Cable clamp
Attached at right side of
unit at default.
You can change the position
to left side.
200
300
Transceiver unit, mounting dimensions