Filter
Top Products
2-1
2. WIRING
2.1 Cabling Outline
Cabling between processor unit and transceiver unit
The cable between the processor unit and transceiver unit comes in lengths of 15 m, 30 m
or 50 m. A connector is pre-fitted at the factory for connection at the transceiver unit. Fit a
connector to the other end of the cable. The cable may be shortened as necessary.
Cabling between the transceiver unit and hull unit
Connectors are pre-fitted at the factory. The length of the cable is 5 or 10 m.
Transducer cable
A connector is pre-fitted for connection to the transducer. Attach a connector to the other
end of the cable for connection to the transceiver unit. For cable extension, use the optional
transducer cable extension kit. It enables extension of the transducer cable up to 6.6 m.