Filter
Top Products
2. WIRING
2-12
80 mm
Soldering side
Pin
Pin
Soldering side
Connector case
Connector case
10 mm
20 mm
3 mm
Shield
20 mm
3 mm
Shield
Vinyl sheath
Vinyl sheath
Vinyl sheath
Armor
Cable with armor
Cable without armor
Solder unused cores and
ground wire to braided shield.
Solder unused cores and
ground wire to braided shield.
Wind shield
tape.
Clamp shielding tape with
connector clamp for grounding.
Soldering
Wind vinyl tape.
Wind vinyl tape.
Clamp fixing screw
Clamp fixing screw
Clamp
Clamp
Set screw
Set screw
GYRO: SRCN6A13-5P
NMEA1/CIF1, NMEA/CIF2: SRCN6A16-10P
LOG: SRCN6A13-3P
ES: SRCN6A16-7P
NMEA1/CIF1, NMEA/CIF2:SRCN6A16-10P
Ground wire
Ground wire
Fabricating of connectors for external equipment
Display unit
Prepare a XGA display locally. When using MU-150C as the display unit, refer to its
operator’s manual. Connect the processor unit and display with the monitor cable
3COX-2P-6C 5 m or 10 m (supplied). Use the MONITOR 1 port for a display unit.