Filter
Top Products
1-1
1. MOUNTING
NOTICE
Be sure the power supply matches equipment voltage
rating.
Improper power supply will damage the equipment.
Locate the transducer where the effects of noise and
air bubbles are minimal.
Noise and air bubbles will affect performance.
When selecting a mounting location keep the
following points in mind:
Keep equipment out of direct sunlight.
Keep equipment away from air conditioner.
Provide sufficient ventilation.
Select locaion where vibration is minimal.
Locate the equipment away from magnets or equipment generating
magnetic fields.
Keep the transducer cable away from oil.
Oil can corrode the transducer cable.
Do not expose the transducer to hot water.
Hot water can damage the transducer.
Do not turn on the equipment with the transducer
exposed to air.
Exposing the transducer to air may damage it.