Filter
Top Products
7. NAVIGATION
7-8
5. Press the [MENU] key several times to close the menu.
A light-blue line runs between destination selected and own ship’s position.
Arrows on the line show the direction to follow. Range and bearing from own
ship’s position to destination appear at the top of the screen.
Selecting waypoint from the history list
The latest five waypoints entered are saved to the history list. You may choose a
waypoint from this list to set it as destination. If five waypoints have been saved,
the oldest one is erased automatically and a new one is saved.
1. Press the [CURSOR ON/OFF] key to turn off the cursor.
2. Press the [GOTO] key to show the following window.
ENTER APPROPRIATE WAYPOINT NUMBER BY NUMERIC KEYS TO SET
THE DESTINATION. OR TURN KNOB TO SELECT THE WAYPOINT ON
THE HISTORY LIST AND PRESS KNOB TO SETUP.
WAYPOINT COMMENT
000005 POINT B
000004 03:29 0301.02
000003 00:20 0301.02
000002 POINT A
000001 00:29 0301.02
GOTO WAYPOINT 00000
0
History list
Last-entered waypoint
Destination window
Note: This window will disappear automatically if there is no key operation
within10 seconds.
3. Rotate the [ENTER] knob to select a waypoint.
4. Press the [ENTER] knob.
A light-blue line runs between destination selected and own ship’s position.
Arrows on the line show the direction to follow. Range and bearing from own
ship’s position to destination appear at the top of the screen.