Filter
Top Products
9. CUSTOMIZING YOUR UNIT
9-9
9.2.2 Resetting trip distance
You can reset trip distance to “0.” The trip distance is shown in the NAV INFO
window. (See paragraph 9.6.2.)
1. Press the [MENU] key to show the main menu.
2. Pres the [8] key to show the PLOTTER SETUP menu.
3. Rotate the [ENTER] knob to select RESET TRIP LOG.
4. Press the [1] key to select “1. YES” to reset trip distance to “0.”
5. Press the [MENU] key several times to close the menu.
9.2.3 Selecting range of PLOTTER (PILOT) display
You may choose the PLOTTER (or PILOT) display ranges you wish to use. After
choosing the ranges desired, change the range with the [ZOOM IN] or [ZOOM
OUT] keys to activate range settings.
Note: At least two ranges must be turned on.
1. Press the [MENU] key to show the main menu.
2. Press the [8] key to show the PLOTTER SETUP menu.
3. Rotate the [ENTER] knob to select “PLOTTER RANGE SETUP.”
4. Press the [1] key to select “1. YES.”
The PLOTTER RANGE SETUP menu appears.