Furuno GP-3500F Marine GPS System User Manual


 
6. ROUTE
6-3
Route name
000002 ROUTE LIST PAGE 1/2
NO. WPT NAME LATITUDE LONGITUDE DISTANCE TTG
1 ------ --˚--.---'N ---˚--.---'E ---.--nm -----.-H
2 ------ --˚--.---'N ---˚--.---'E ---.--nm -----.-H
3 ------ --˚--.---'N ---˚--.---'E ---.--nm -----.-H
4 ------ --˚--.---'N ---˚--.---'E ---.--nm -----.-H
5 ------ --˚--.---'N ---˚--.---'E ---.--nm -----.-H
6 ------ --˚--.---'N ---˚--.---'E ---.--nm -----.-H
7 ------ --˚--.---'N ---˚--.---'E ---.--nm -----.-H
8 ------ --˚--.---'N ---˚--.---'E ---.--nm -----.-H
9 ------ --˚--.---'N ---˚--.---'E ---.--nm -----.-H
10 ------ --˚--.---'N ---˚--.---'E ---.--nm -----.-H
11 ------ --˚--.---'N ---˚--.---'E ---.--nm -----.-H
12 ------ --˚--.---'N ---˚--.---'E ---.--nm -----.-H
13 ------ --˚--.---'N ---˚--.---'E ---.--nm -----.-H
14 ------ --˚--.---'N ---˚--.---'E ---.--nm -----.-H
15 ------ --˚--.---'N ---˚--.---'E ---.--nm -----.-H
16 ------ --˚--.---'N ---˚--.---'E ---.--nm -----.-H
17 ------ --˚--.---'N ---˚--.---'E ---.--nm -----.-H
18 ------ --˚--.---'N ---˚--.---'E ---.--nm -----.-
RNG=---.--nm BRG=---.-˚
WPT NAME LATITUDE LONGITUDE COMMENT
000001 34˚44.041'N 135˚21.255'E 00:29 0301.01
000002 34˚44.237'N 135˚20.936'E POINT A
000003 33˚43.878'N 134˚20.049'E 00:20 0301.02
000004 32˚33.678'N 133˚21.029'E 03:29 0301.02
000005 33˚40.591'N 134˚20.628'E POINT B
PRESS KNOB: ADD WPT CLEAR KEY: DELETE WPT
CURSOR ON/OFF KEY: SKIP MENU KEY: RETURN
ZOOM IN: PREVIOUS PAGE ZOOM OUT: NEXT PAGE
Waypoints in the route
Waypoints window
Distance and bearing
between the waypoint
selected with the red
cursor and preceding
waypoint.
When the first waypoint
is selected, distance and
bearing between own
ship's position and it are
shown.
Waypoints window
8. Roll the trackball in up-down direction to select the starting waypoint.
When more than five waypoints are entered, press the [ZOOM IN] or [ZOOM
OUT] key to change the page.
9. Press the [ENTER] knob. The selected waypoint is entered in the route as
starting point.
10. Repeat steps 8 and 9 to complete the route.
11. Press the [WPT] or [MENU] key.
The ROUTE LIST shows total distance, ETA and TTG of the route.
12. Press the [MENU] key several times to close the menu.