Filter
Top Products
1. BASIC OPERATION
1-15
3. Press the [7] key to display the SIMULATION MODE menu.
0-7. SIMULATION MODE SETUP
PLOTTER 1. SIM 2. LIVE
SPEED 09.9 kt
COURSE 1. DIRECTION 2. 8 FIGURE
DIRECTION 000.0°
LATITUDE 45°35.000'N
LONGITUDE 125°00.000'W
DATE & TIME 03.01.01 00:00
ECHO SOUNDER 1. SIM 2. LIVE
TURN KNOB TO SELECT MENU.
SETUP SIMULATION MODE BY TRACKBALL.
Simulation mode setup menu
4. Rotate the [ENTER] knob to choose PLOTTER.
5. Press the [1] key to choose "1. SIM."
6. Rotate the [ENTER] knob to choose SPEED.
7. Enter speed (setting range: 0.0 to 99.9 kt) with the numeric keys, then press
the [ENTER] knob.
8. Rotate the [ENTER] knob to choose COURSE.
9. Press the [1] or [2] key to choose "1. DIRECTION" or "2. 8 FIGURE."
DIRECTION: Track is traced according to course set. Go to step 10.
8 FIGURE: Track is traced in a figure-eight course. Go to step 12.
10. Rotate the [ENTER] knob to choose DIRECTION.
11. Enter course (setting range: 0.0 to 359.9) with the numeric keys, then press
the [ENTER] knob.
12. Rotate the [ENTER] knob to choose LATITUDE.
13. Enter latitude with the numeric keys, and press the [ENTER] knob.
Press the [CURSOR ON/OFF] key to switch from north to south and vice
versa.
14. Rotate the [ENTER] knob to choose LONGITUDE.
15. Enter longitude with the numeric keys, and then press the [ENTER] knob.
Press the [CURSOR ON/OFF] key to switch from east to west and vice
versa.
16. Rotate the [ENTER] knob to choose DATE & TIME.