Filter
Top Products
Install the Gateway Module Hardware
312785C 11
Mount the Control on DIN Rail
The Gateway control mounts on a DIN rail. Tilt the con-
trol and push down onto the DIN rail, then push in. See
F
IG. 10. A minimum clearance of 1 in. (25 mm) above
and below the control is required to ensure adequate
ventilation.
Install CompactFlash
®
Card
The CompactFlash socket accepts either Type I or Type
II cards. These cards are available at most computer
and office supply retailers. Use cards with a minimum of
4 Mbytes and a maximum of 2 Gbytes. Use the Com-
pactFlash card for optional database storage only. See
F
IG. 11.
F
IG. 9: Ethernet Connection
TI13973a
Green/Amber
LED
ETHERNET
Yellow LED
Standard Ethernet Cable
FIG. 10: Mount the Control on a DIN Rail
TI13965a
1 in. (25 mm)
minimum
clearance top
and bottom
TI13966a
FIG. 11: Install a CompactFlash Card
Insert card with top side
on the left. Do not insert
or remove card while
power is applied.
TI13967a