Filter
Top Products
Graco Gateway Network Communications Configuration
18 312785C
Map Data
1. See FIG. 22. Select the block for data mapping. Click
the Edit button next to the Start Address field on the
right side of the window. The Select Address win-
dow will open.
2. Refer to Table 4 on page 30 for a Modbus map.
Select the desired Modbus register address as a
starting point (in this case 40002). Enter the appro-
priate values in the Select Address window and click
OK. The desired register address will populate the
Start Address field.
F
IG. 22: Mapping Gateway Blocks