Filter
Top Products
Appendix B: Profibus
™
DP Slave Communication
312785C 67
The option card appeared in the communication tree.
Select the Profibus Interface and click the Edit button to
select a driver. Click OK to pick the Profibus DP driver.
F
IG. 60.
Graco Gateway now displays the driver settings where
the Station Address can be changed. This address is
the Gateway address on the Profibus network. In our
example, this address is 5 as setup in the PLC earlier.
NOTE: There are no Baud Rate settings as the Profibus
option card detects the transmission rate automatically.
A device called PLC1 is now displayed under the Profi-
bus Interface. This device represents the Profibus Mas-
ter and can be renamed to fit the application. In this
example, the name PLC1 remains. F
IG. 61.
F
IG. 60: Select Profibus Server
FIG. 61: Block Settings