Filter
Top Products
Graco Gateway Network Communications Configuration
312785C 15
Graco Gateway Network Communications
Configuration
Startup
To run GracoConfig, select the icon from the
Graco folder on the Programs section of your Start
Menu. The main page will appear, showing the Commu-
nications button.
GracoConfig Main Page
Communications Button
The Communications button provides access to screens
used to configure your system and setup parameters,
allowing you to:
• Specify which protocols are to be used on the Gate-
way serial ports and on the Ethernet port.
• If using master protocols (ie., protocols by which the
Gateway initiates data transfer to and from a remote
device), you can specify one or more devices to be
accessed.
• If using slave protocols (i.e., protocols by which the
Gateway receives and responds to requests from
remote devices or computer systems), you can set
read or write access for specific data items.
• Move data between one remote device and another.
Balloon Help
The Balloon Help feature allows you to see help infor-
mation for each icon in the main menu, or for each field
in a dialog box or window. It is controlled via the
icon at the right-hand edge of the toolbar. Balloon Help
has three user-selectable modes:
• Do Not Display disables balloon help
• When Mouse Over displays help when the mouse
pointer is held over a particular field for a certain
period of time
• When Selected displays help constantly for the cur-
rently selected field.
F
IG. 17: Communications Button
Communications Button