Filter
Top Products
Graco Gateway Network Communications Configuration
20 312785C
4. See FIG. 24. Click OK. The range of addresses will
appear under the appropriate Block on the left side
of the window.
NOTE: In this example, a Modbus device master
communicating via TCP/IP will have direct access to
Modbus registers 40002 through 40008 of the Pro-
Mix 2KS.
For example, see Block 1 address line 1:
5. The Direction field typically should remain set to
Device to G3.
Modbus address (command)
from TCP/IP master
connected to Gateway.
Modbus address
of ProMix 2KS.
FIG. 24: Block Mapping Data