Filter
Top Products
44 Intel Astor II Server Chassis Subassembly Product Guide
Front Panel Board
Removing the Front Panel Board
The front panel board contains the system controls and indicators. The board is mounted on a snap
on standoff and a threaded standoff inside the chassis.
1. Observe the safety and ESD precautions at the beginning of this chapter.
2. Remove the side cover.
3. Remove the hot-swap bay.
4. Remove and save the snap rivets holding the front panel board to the chassis.
5. Disconnect the data cables from the front panel.
6. Remove the front panel board from the system, and place it on an antistatic foam pad or a
grounded workstation.
OM07098
Figure 29. Removing the Front Panel Board
Installing the Front Panel Board
1. Position the front panel board over the tabs inside the chassis.
2. Reconnect the data cables to the front panel board.
3. Insert the snap rivets from the bottom, through the tabs and the front panel.
4. Reinstall the hot-swap bay.
5. Reinstall the side cover.