Filter
Top Products
7
1 System Description
Kit Contents
The Astor II chassis subassembly kit includes this Product Guide, a power cord, an I/O shield EMI
gasket, two chassis feet, and three hardware bags:
Server board installation bag: includes three rubber bumpers, 13 standoff clips, and 13
retention screws.
Chassis intrusion switch bag: includes one intrusion switch/cable assembly, one mounting
screw, and three wire tie clips.
Internal/external peripheral mounting bag: includes four 5.25-inch external drive rails and
mounting screws without washers (2 screws/rail x 4 + 2 for diskette = 10 total); mounting
screws with washers for SCA2 hard drive caddies (4 screws/drive x 5 + 1 spare = 21 total);
mounting screws with washers for chassis feet (2 screw/foot x 2 = 4 total); and gold colored
mounting screws for IDE drives (4 screws/drive x 2 = 8 total).
Feature Summary
Table 1. Feature Summary
Feature Description
Drive Bays One 3.5-inch diskette drive bay, accessible from front.
Two 5.25-inch wide bays that are externally accessible, designed to hold half-
height standard removable media devices; the bays can be converted into a
single full-height bay.
Hot-swap bay for 3.5-inch hard disk drives: space for up to five 1-inch high,
SCA2 hard drives.
Two 3.5-inch wide bays that are not externally accessible, designed to hold
half-height IDE drives.
Expansion slot covers Up to seven expansion slots can be used; every slot that does not have an
add-in board installed must have a slot cover installed.
Power supply 300 watt power factor correction (PFC) power supply, integrated cooling fan.
Detachable AC power cord.
Cooling Three system fans inside the chassis and one power supply fan provide
cooling and airflow.