Command Groups 115
PIM-SM
show ip pimdm interface
stats
Displays the statistical information for PIM-
DM on the specified interface.
UE
show ip pimdm neighbor Displays the neighbor information for PIM-DM
on the specified interface.
PE
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 64.
Command Description Mode*
ip pimsm Sets administrative mode of PIM-SM multicast
routing across the router to enabled.
GC
ip pimsm
cbsrhasmasklength
Configures the CBSR hash mask length to be
advertised in bootstrap messages for a particular
PIM-SM interface.
IC
ip pimsm cbsrpreference Configures the CBSR preference for a particular
PIM-SM interface.
IC
ip pimsm crppreference Configures the Candidate Rendezvous Point
(CRP) for a particular PIM-SM interface.
IC
ip pimsm message-interval Configures the global join/prune interval for
PIM-SM router.
GC
ip pimsm mode Sets to enabled the administrative mode of
PIM-SM multicast routing on a routing
interface.
IC
ip pimsm query-interval Configures the transmission frequency of hello
messages in seconds between PIM enabled
neighbors.
IC
ip pimsm register-rate-limit Sets the Register Threshold rate for the RP
(Rendezvous Point) router to switch to the
shortest path.
GC
ip pimsm spt-threshold Configures the threshold rate for the RP router
to switch to the shortest path.
GC
ip pimsm staticrp Creates RP IP address for the PIM-SM router. GC
ip pim-trapflags Enables the PIM trap mode for both Sparse
Mode (SM) and Dense Mode (DM).
GC
Command Description Mode*
