Command Groups 89
Switchport Voice
TACACS+
VLAN
Command Description Mode*
switchport voice detect
auto
Enables the VoIP Profile on all the interfaces of
the switch.
GC/IC
show switchport voice Displays the status of auto-voip on an interface
or all interfaces.
PE
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 64.
Command Description Mode*
key Specifies the authentication and encryption key
for all TACACS communications between the
device and the TACACS server.
TC
port Specifies a server port number. TC
priority Specifies the order in which servers are used. TC
show tacacs Displays TACACS+ server settings and
statistics.
PE
tacacs-server host Specifies a TACACS+ server host. GC
tacacs-server key Sets the authentication and encryption key for
all TACACS+ communications between the
switch and the TACACS+ daemon.
GC
tacacs-server timeout Sets the interval for which the switch waits for a
server host to reply.
GC
timeout Specifies the timeout value in seconds. TC
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 64.
Command Description Mode*
dvlan-tunnel ethertype Configures the EtherType for the interface. GC
interface vlan Enters the interface configuration (VLAN)
mode.
GC
