A SERVICE OF

logo

Ethernet Configuration Commands 303
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the description for the interface 1/g1.
console>show interfaces description
Port Description
---- ---------------------------------------------
1/g1 Port that should be used for management only
2/g1
2/g2
Ch Description
---- -----------
1 Output
show interfaces detail
Add support for a single command that shows VLAN info, STP info, Port
status info, Port configuration info. Add a command which wraps all the port
commands into a single command.
Syntax
show interfaces detail [ethernet
interface
| port-channel
port-channel port-
channel-number
]