OSPF Commands 901
Example
The following example displays OSPF router information.
console#show ip ospf
Router ID...................................... 1.1.1.1
OSPF Admin Mode................................ Enable
RFC 1583 Compatibility......................... Enable
External LSDB Limit............................ No Limit
Exit Overflow Interval......................... 0
Spf Delay Time................................. 5
Spf Hold Time.................................. 10
Opaque Capability.............................. Disable
AutoCost Ref BW................................ 100 Mbps
Default Passive Setting........................ Disabled
Maximum Paths.................................. 4
Default Metric................................. Not
configured
Default Route Advertise........................ Disabled
Always......................................... FALSE
Metric......................................... Not
configured
Metric Type.................................... External
Type 2
Number of Active Areas......................... 1 (1 normal,
0 stub, 0 nssa)
ABR Status..................................... Disable
Distribute-List Shows the access list used to filter redistributed routes.
