A SERVICE OF

logo

Open as PDF
next previous
674 DHCPv6 Commands
Default Configuration
Enabled is the default state.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example enables DHCPv6 globally.
console#configure
console(config)#service dhcpv6
console(config)#no service dhcpv6
show ipv6 dhcp
Use the show ipv6 dhcp command in Privileged EXEC mode to display the
DHCPv6 server name and status.
Syntax
show ipv6 dhcp
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.