118 Command Groups
Tunnel Interface
Virtual LAN Routing
Virtual Router Redundancy
show ip rip interface brief Displays general information for each RIP
interface.
PE
split-horizon Sets the RIP split horizon mode. RIP
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 64.
Command Description Mode*
interface tunnel Enables the interface configuration mode for a
tunnel.
GC
show interface tunnel Displays the parameters related to tunnel such
as tunnel mode, tunnel source address and
tunnel destination address.
PE
tunnel destination Specifies the destination transport address of
the tunnel.
IC
tunnel mode ipv6ip Specifies the mode of the tunnel. IC
tunnel source Specifies the source transport address of the
tunnel, either explicitly or by reference to an
interface.
IC
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 64.
Command Description Mode*
show ip vlan Displays the VLAN routing information for all
VLANs with routing enabled.
PE
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 64.
Command Description Mode*
ip vrrp Enables the administrative mode of VRRP for
the router.
GC
Command Description Mode*
