498 QoS Commands
show interfaces cos-queue
Use the show interfaces cos-queue command in Privileged EXEC mode to
display the class-of-service queue configuration for the specified interface.
Syntax
show interfaces cos-queue [<
unit>/<port-type><port>
|port-channel
port-channel number
]
•
<unit>/<port-type><port>
— Specifies a valid unit/port combination:
–<
unit
> — Physical switch identifier within the stack. Values are
1-12
.
–<
port-type
> — Values are
g
for gigabit Ethernet port, or
xg
for 10
gigabit Ethernet port.
–<
port
> — port number. Values are
1-24
or
1-48
for port_type g, and
1-4 for port_type xg.
Example: xg2 is the 10 gigabit Ethernet port 2.
•
port-channel number
— Specifies a valid port-channel number. Range is 1-
8.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
If the interface is specified, the class-of-service queue configuration of the
interface is displayed. If omitted, the most recent global configuration
settings are displayed.
Examples
The following example displays the COS configuration with no unit/port or
port-channel parameter.
console#show interfaces cos-queue
