A SERVICE OF

logo

Open as PDF
next previous
202 AAA Commands
password (Line Configuration)
Use the password command in Line Configuration mode to specify a
password on a line. To remove the password, use the no form of this
command.
Syntax
password
password
[encrypted]
no password
•
password
— Password for this level. (Range: 8- 64 characters)
•
encrypted
— Encrypted password to be entered, copied from another
switch configuration.
Default Configuration
No password is specified.
Command Mode
Line Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example specifies a password "mcmxxyyy" on a line.
console(config-line)# password mcmxxyyy
password (User EXEC)
Use the password command in User EXEC mode to allow a user to change
the password for only that user. This command should be used after the
password has aged. The user is prompted to enter the old password and the
new password.
Syntax
password