A SERVICE OF

logo

Open as PDF
next previous
1314 System Management Commands
Per Unit Status Parameters are explained as follows:
show system
Use the show system command in User EXEC mode command to display
system information.
Syntax
show system [
unit
]
•
unit
— The unit number.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays system information.
console#show system
System Description: Dell Ethernet Switch
System Up Time: 0 days, 00h:02m:14s
System Contact:
System Name:
System Location:
Parameter Description Range Default
NSF Support Whether a unit
supports NSF
Yes or No