A SERVICE OF

logo

Open as PDF
next previous
Address Table Commands 233
show bridge address-table count
Use the show bridge address-table count command in Privileged EXEC mode
to display the number of addresses present in the Forwarding Database.
Syntax
show bridge address-table count [vlan
vlan
|ethernet
interface-number
|port-
channel
port-channel-number
]
•
vlan
— Specifies a valid VLAN, such as VLAN 1
•
interface
— Specifies a valid Ethernet port
•
port-channel-number
— Specifies a valid port-channel-number
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the addresses in the Forwarding Database:
console#show bridge address-table count
Capacity: 8192
Used: 109
Static addresses: 2
Secure addresses: 1
Dynamic addresses: 97
Internal addresses: 9