A SERVICE OF

logo

586 VLAN Commands
console(config)#protocol vlan group all 2
show dvlan-tunnel
Use the show dvlan-tunnel command in Privileged EXEC mode to display all
interfaces enabled for Double VLAN Tunneling.
Syntax
show dvlan-tunnel
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example shows how to display all interfaces for Double VLAN
Tunneling.
console#show dvlan-tunnel
Interfaces Enabled for DVLAN Tunneling......... 1/g1
show dvlan-tunnel interface
Use the show dvlan-tunnel interface command in Privileged EXEC mode to
display detailed information about Double VLAN Tunneling for the specified
interface or all interfaces.
Syntax
show dvlan-tunnel interface {
unit/port
| all}
unit/port
— A valid unit and port number separated by forward slashes (/).
all
— Displays information for all interfaces.