Command Groups 99
IP Routing
ip helper enable Enables relay of UDP packets. GC
show ip helper-address Displays the IP helper address configuration. PE
show ip helper statistics Displays the number of DHCP and other UDP
packets processed and relayed by the UDP relay
agent.
PE
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 64.
Command Description Mode*
encapsulation Configures the link layer encapsulation type for
the packet.
IC
ip address Configures an IP address on an interface. IC
ip mtu Sets the IP Maximum Transmission Unit
(MTU) on a routing interface.
IC
ip netdirbcast E
nables the forwarding of network-directed
broadcasts.
IC
ip route Configures a static route. Use the no form of
the command to delete the static route.
GC
ip route default Configures the default route. Use the no form
of the command to delete the default route.
GC
ip route distance Sets the default distance (preference) for static
routes.
GC
ip routing Globally enables IPv4 routing on the router. GC
routing Enables IPv4 and IPv6 routing for an interface. IC
show ip brief Displays all the summary information of the IP. PE
show ip interface Displays all pertinent information about the IP
interface.
PE
show ip protocols Displays the parameters and current state of the
active routing protocols.
PE
show ip route Displays the routing table. PE
Command Description Mode*
