A SERVICE OF

logo

Open as PDF
next previous
998 Router Discovery Protocol Commands
ip irdp
Use the ip irdp command in Interface Configuration mode to enable Router
Discovery on an interface. Use the no form of the command to disable Router
Discovery.
Syntax
ip irdp
no ip irdp
Default Configuration
Disabled is the default configuration.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
This command has no user guidelines.
Example
The following example enables router discovery on the selected interface.
console(config)#interface vlan 15
console(config-if-vlan15)#ip irdp
ip irdp address
Use the ip irdp address command in Interface Configuration mode to
configure the address that the interface uses to send the router discovery
advertisements. Use the no form of the command to return the address to the
default.
Syntax
ip irdp address
ip-address
no ip irdp address