Filter
Top Products
1 Getting Acquainted
10 System Components
Quick Reference Guide
System Components
System
Components
Description
Processor
Module
Provides the software intelligence that controls the system’s
features. It has jacks for five outside lines and nine enhanced
tip/ring extensions. The processor also has two PCMCIA slots
for ASA/DXD, PARTNER Voice Mail Release 3.0, or Remote
Administration cards. The module has a grounding screw and
jacks for the following:
• Music-On-Hold audio source
• Two Contact Closures
• A call reporting device, such as an SMDR printer
If you have a loudspeaker paging system, connect it to one of
the line jacks on a module in the PARTNER system. If the
loudspeaker paging system requires a “dry contact relay,”
connect the system to line jack 5.
Line and
Extension
Modules
Installed in a carrier, these modules provide additional outside
line jacks and/or extension jacks. The 2-slot carrier
configuration can hold two modules. The 5-slot carrier
configuration can hold five modules. For more information about
the line and extension modules, see the PARTNER Advanced
Communications System Release 7.0 Installation,
Programming, and Use guide.
Telephones The PARTNER-34D, PARTNER-18D, PARTNER-18, and
PARTNER-6 telephones and the PARTNER CA48 Call
Assistant Intercom Autodialer are products specifically
designed to work with the system. You can also use the
MLS-series, TransTalk
©
9000-series, industry-standard
single-line rotary or touch-tone telephones with the system.
PARTNER Endeavor telephones are supported when an
Endeavor 362EC module is installed in the carrier.