Filter
Top Products
3 Setting Up Your System
38 Administering the Loudspeaker Paging System
Quick Reference Guide
3 Select another procedure, or exit programming mode.
Automatic Daylight/Standard Times (#126)
This feature is turned on by default and automatically updates the system clock
for annual Daylight Savings Time and Standard Time changes. If you are in an
area that does not have daylight savings time, use the procedure below to turn
off this feature.
To change the status of Automatic Daylight/Standard Time:
1 Press f00ss#126 at extension
10 or 11.
2 Press D until the appropriate value appears:
• 1 = Active (the factory setting)
• 2 = Not Active
3 Select another procedure, or exit programming mode.
Administering the Loudspeaker Paging
System
Use the feature Loudspeaker Paging Line (#617) to specify the line jack to which
you connected the loudspeaker paging system. Refer to the PARTNER
Advanced Communications System Installation, Programming, and Use guide
for more detail.