Filter
Top Products
6 Maintaining Your System
Backup and Restore 67
Quick Reference Guide
Restore Programming (#125)
Use this feature to reinstate your system and telephone programming (except the
System Day and System Time) to the settings saved on the processor module or
a PC Card at the last system backup (manual or automatic). You should restore
the system settings if your system settings become corrupted, if you make
changes and decide you would rather use the former settings, or if you replace
your processor module and want to retain the system settings you had on the
previous processor module. A successful restore takes about five seconds.
To initiate a restore:
1 If you want to restore from a PC Card, verify that only one Backup/Restore
Card is in the processor module. If you do not have a PC Card installed, see
the PARTNER PC Card Installation Instructions that came with your PC
Card.
2 Press f00ss#125 at extension
10 or 11.
3 Choose the backup file you want to use for the restore:
• 1 Internal Man.mmddyy, where “mmddyy” represents the date of the
manual backup to the internal memory of the processor module
• 2 PC Card Man.mmddyy, where “mmddyy” represents the date of the
manual backup on the PC Card
• 3 Internal AUTO.mmddyy, where “mmddyy” represents the date of
the automatic backup to the internal memory of the processor module
• 4 PC Card AUTO.mmddyy, where “mmddyy” represents the date of the
automatic backup on the PC Card
When a restore completes successfully, the Restore Complete
message appears for two seconds at idle extensions 10 and 11. Then a
System Reset—Programming Saved (#728) occurs, disconnecting any
calls in progress. You should warn users before beginning a restore, or
do the restore during nonbusiness hours.