Filter
Top Products
109
Centralized Telephone Programming Flow Chart—How to Use
To use the Centralized Telephone Programming Flow Chart, follow these instructions first:
Place the Programming Overlay on the dialpad of the system display phone at extension 10 or 11.
•
To Enter Programming Mode:
—Press f 0 0
—Press
s s c
—Dial the extension number to be programmed. Buttons on to which lines or pools are assigned light up to show the current Line Ringing
setting: remaining buttons can be programmed with Auto Dial number or features
• To Program Another Feature at the Same Extension:
—After you program one feature, continue with the instructions in the box for the next feature
• To Change Setting for Another Extension
—Press c
—Dial the new extension’s number
• To Erase a Feature or Auto Dial Button:
—Press the programmed button
—Press
!
• To End Programming Mode:
—Press f 0 0
= Factory setting
= Button with lights required
= Button with lights recommended
Icon Description