Filter
Top Products
7 If Something Doesn’t Work
88 Clearing a Backup-Failure Alarm
Quick Reference Guide
Clearing a Backup-Failure Alarm
If you use Backup Programming—Automatic (#123) or system initiated backups,
and the automatic backup fails, a Backup-Failure Alarm message appears
(instead of the default day/date/time message) on the top line of the telephone
display at idle extensions 10 and 11.
After correcting the problem that caused the failure, clear the Backup-Failure
Alarm by following these steps:
1 Press f00ss#123.
2 Press 4 to choose Option 4, “Backup Alarm Cleared.”
3 Exit programming mode.
• You cannot use D or d in this procedure to
choose Option 4.
• Using Option 4 to clear a Backup-Failure Alarm does not
change the setting for Backup Programming—Automatic
(#123). It remains either Active or Not Active.