Filter
Top Products
Overview 29
3 Setting Up Your System
Overview
This chapter explains the basics of programming and the programming of
features involved in the setup of the system, including the programming of a
voice messaging system. Refer to the PARTNER Advanced Communications
System Release 7.0 Installation, Programming, and Use guide for more detailed
programming information.
You can program a PARNTER system in either of the following ways:
• from a system display phone at extension 10 or 11
• from a PC that is running PARTNER ACS R7.0 PC Administration software
and is connected to the PARTNER system. With the PARTNER ACS R7.0
PC Administration software, you can administer and maintain the
PARTNER system from your PC.
The remainder of this guide describes how to program the PARTNER system
from a system display phone at extension 10 or 11. If you want to program the
PARTNER system using the PARTNER ACS R7.0 PC Administration application,
see the PARTNER ACS R7.0 PC Administration Getting Started Guide to install
and use the PARTNER ACS R7.0 PC Administration application.
If the PARTNER system has a T1 module, you must use the PARTNER
ACS R7.0 PC Administration software to configure the T1 module and
its lines and use the All Lines Busy feature.