Filter
Top Products
2 Installing Your System
Installing the Control Unit 17
Quick Reference Guide
CAUTION:
Do not force the module. Use the carrier shelf as a reference and do
not tilt, slant, or rotate the module. If the module does not insert easily,
remove it, clear any obstruction, and reinsert it.
• If you use a T1 module, it must be in the first slot on the left. The
012E, 308EC, and 206 modules must be to the left of any 400
and 200 modules. Only one T1 module is supported.
• If you use a 1600 DSL module, it must be in the first slot on the
left. The 012E, 308EC, and 206 modules must be to the left of
any 400 and 200 modules. Only one DSL module is supported.
• PARTNER ACS Release 7.0 supports either one T1 module or
one 1600 DSL module.
• PARTNER ACS Release 7.0 supports Endeavor telephones and
the Endeavor 362EC module. Install the Endeavor 362EC
module(s) to the right of the T1 module or 1600 DSL module, if
one is installed, and to the left of all 400 and 200 modules.
• In Release 7.0, the system extension maximum is 48. However,
in some configurations, the 012E module and/or the PARTNER
Messaging module will physically permit more than 48 stations
to be installed in the 5-slot carrier. In these configurations, only
station ports and voice messaging ports up to 48 will function.
Station ports and voice messaging ports above 48 will not
function with ETR or T/R telephones because they are outside
the PARTNER ACS dial plan.