Filter
Top Products
5 Programming Telephone Features
Extension Name Display 59
Quick Reference Guide
4 Press the line, pool, or i buttons in the desired order. The valid
entries for Automatic Line Selection depend upon the type of extension:
• Key Extension: Outside system lines, Left Intercom (the factory setting)
• Pooled Extension: Pool 880 button 1, button 2, Left Intercom, Right
Intercom (the factory setting), Pools 881-883, individual lines
5 To exit Automatic Line Selection, press **.
6 Press c and enter a new extension number, or exit
programming mode.
Extension Name Display
You can assign a name to an extension: up to 20 characters long on PARTNER
telephones or up to 12 characters long on MLS telephones. Then, when that
extension is used to make an intercom, group, or transferred call, the name
appears on the system display telephone receiving the call. Similarly, users
receiving a transfer return call see the name of the person assigned to the
extension that did not answer the transferred call. The following table shows the
valid character entries for Extension Name Display.
Valid Character Entries
Letters Numbers
A = 21 N = 62 blank = 11
B = 22 O = 63 0 = 00
C = 23 P = 71 1 = 10
D = 31 Q = 72 2 = 20
E = 32 R = 73 3 = 30
F = 33 S = 74 4 = 40
G = 41 T = 81 5 = 50
H = 42 U = 82 6 = 60
I = 43 V = 83 7 = 70