Filter
Top Products
Accessories A-5MN1903
A.1.5 Digital output modules
The digital output drive on NextMove PCI is in the form of a removable module which allows
different types of outputs for different applications. Currently there are two modules available:
Catalog
number
Description
OPT025-508 NPN - N-channel unprotected MOSFET module for current sinking outputs
OPT025-507
PNP - Darlington module for current sourcing outputs, with built in fly-back
diodes.
A.1.6 NextMove PC system adapter
The NextMove PC adapter takes the output from the 100-pin connector of NextMove PCI and
converts it to be compatible with the NextMove PC cable, allowing for machine conversion
from NextMove PC to NextMove PCI with minimal change to the physical wiring of the
machine.
Catalog
number
Description
OPT026-506 Allows NextMove PCI to connect to a NextMove PC system.
Note: If the NextMove PC Breakout module is also being used, the digital input banks
use one common connection. The USR V+ supply is used to determine the sense
of the digital inputs. Connecting CGND to the common connection will cause
inputs to be active high (active when a +24V is applied). Connecting USR V+ to
the common connection will cause inputs to be active low (active when a 0V is
applied). Jumpers on the system adapter select whether USR V+ or CGND is
connected to the common connection.
A.1.7 Sp ares
Catalog
number
Description
FU056A01 NextMove PCI - Strip of 10 fuses for the digital outputs.
OPT025-501* Cable to allow NextMove PCI to connect to a NextMove PC system.
OPT025-502*
Non-isolated CAN transceiver (SIL hybrid module).
Supports speeds up to 500Kbit/s.
OPT025-503*
Isolated CAN transceiver (SIL hybrid module).
Supports speeds up to 1Mbit/s.
*These items are located on the breakout module.