Filter
Top Products
The Network Settings screen displays.
Network settings screen
The Network Settings screen details are explained as follows:
Table 17. Network settings
Menu Item Description
PXE Device n (n = 1 to 4) Enables or disables the device. When enabled, a UEFI boot option is
created for the device.
PXE Device n Settings (n = 1
to 4)
Allows you to control the configuration of the PXE device.
Editing integrated devices details
You can use the Integrated Devices screen to view and configure the settings of all integrated devices
including the video controller, integrated RAID controller, and the USB ports.
1. Go to System Setup Main Menu, and then click System BIOS.
2. On System BIOS, click Integrated Devices.
The Integrated Devices screen displays.
Integrated devices screen details
The Integrated Devices screen details are explained below.
Table 18. Integrated devices
Menu Item Description
USB 3.0 Setting Enables or disables the USB 3.0 support. Enable this option only if your
operating system supports USB 3.0. If you disable this option, devices operate
at USB 2.0 speed. USB 3.0 is disabled by default.
User Accessible USB
Ports
Enables or disables the USB ports. Selecting Only Back Ports On disables the
front USB ports, selecting All Ports Off disables all USB ports. The USB
keyboard and mouse operates during boot process in certain operating
systems. After the boot process is complete, the USB keyboard and mouse do
not work if the ports are disabled.
NOTE: Selecting Only Back Ports On and All Ports Off disables the USB
management port and also restrict access to iDRAC features.
Internal USB Port Enables or disables the internal USB port. By default, the option is set to
Enabled.
Integrated RAID
Controller
Enables or disables the integrated RAID controller. By default, the option is
set to Enabled.
Integrated Network
Card 1
Enables or disables the integrated network card.
Embedded NIC1 and
NIC2
NOTE: The Embedded NIC1 and NIC2 option is only available on
systems that do not have Integrated Network Card 1.
Enables or disables the Embedded NIC1 and NIC2 . If set to Disabled, the NIC
may still be available for shared network access by the embedded
35