Filter
Top Products
Figure 20. Removing and installing SATADOM
1. SATADOM
2. SATA connector
3. power cable 4. SATADOM TBU power connector
Next steps
Follow the procedure listed in After working inside your system.
Installing the SATADOM
Prerequisites
1. Ensure that you read the Safety instructions.
2. Follow the procedure listed in Before working inside your system.
3. Remove the cooling shroud prior to installing SATADOM. For information about removing the
cooling shroud, see Removing the cooling shroud
.
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
NOTE: Dell recommends that you do not modify the SATADOM Read/Write default setting.
65