Filter
Top Products
Steps
1. Locate the battery socket. For more information, see System board connectors.
CAUTION: To avoid damage to the battery connector, you must firmly support the connector
while installing or removing a battery.
2. Place your finger between the securing tabs at the negative side of the battery connector and lift the
battery out of the socket.
Figure 43. Removing the system battery
1. positive side of the battery connector
2. system battery
3. negative side of the battery connector
3. To install a new system battery, hold the battery with the "+" facing up and slide it under the securing
tabs.
4. Press the battery into the connector until it snaps into place.
98